| Products | |
| Firefighting Equipment | |
| Adapters and Dry Hydrant Systems | |
| Catalog Request | |
| Home | |
| Support | |
| Technical Information | |
| General Information | |
| About Us | |
| Company Information | |
| Contact Us | |
| Search | |
| Links | |
| News | |
| Search POK Website | |
| Advanced Search | |
| Weekly Newsletter | |
 |
|
|||||
500 Series - 10 to 125 GPM - 1.0" or 1.5" inlet |
||||||
- |
||||||
750 Series - 50 to 250 GPM - 1.5" or 2.5" |
||||||
- |
||||||
1000 Series - 50 to 250 GPM - 2.5" inlet |
||||||
 |
|
|||||
150 Series - 10, 20, 25 & 40 GPM |
||||||
- |
||||||
500 Series - 30, 60, 95 & 125 GPM- 40, 80 & 125 GPM- 60, 95 & 125 GPM |
||||||
- |
||||||
750 Series - 95, 125, 150 & 200 GPM - 95, 125, 150 & 250 GPM |
||||||
- |
||||||
|
1000 Series - 100, 150, 200 & 250 GPM - 125, 150, 200 & 250 GPM - 200, 250, 300 & 350 GPM |
||||||
 |
|
|||||
Available in 100 PSI or Low Pressure 75 PSI & 50 PSI models |
||||||
- |
||||||
150 Series
40 GPM |
||||||
500 Series 60,95,125,150 |
||||||
750 Series
175,200,250,300 |
||||||
 |
|
|||||
Redundant Spring System So Nozzle Stays In Calibration |
||||||
- |
||||||
Flow Ranges Available |
||||||
- |
||||||
10-60 GPM 150 Series |
||||||
40-150 GPM 500 Series |
||||||
|
60-250 GPM 650 Series |
||||||
|
80-250 GPM 750 Series |
||||||
|
100-400 GPM 1000 Series |
||||||
 |
|
|||||
Super wide flow range of 15-250 GPM |
||||||
- |
||||||
Dual Pressure Nozzle with Low Pressure 50 PSI or 100 PSI with just a turn of a knob |
||||||
- |
||||||
6 Flow Settings Built into Shut-off Handle |
||||||
- |
||||||
Include 100%, 80%, 60%, 40%, 20% Of Water Flow-Nozzle Operator Can Control GPM |
||||||
 |
|
|||||
Bronze construction and the shutoff ball is made of Delrin™ |
||||||
- |
||||||
Constant or selectable gallonage nozzle |
||||||
- |
||||||
From 60 GPM to 250 GPM |
||||||
- |
||||||
1.5" or 2.5" inlet |
||||||
 |
|
|||||
Combination Smooth Bore and Fog Nozzle |
||||||
- |
||||||
Handle Shutoff Shuts Both Flows Off At The Same Time |
||||||
- |
||||||
Wide Angle Fog Attachment (COMBIPOK One- Slide On/Off & Two-Twist On/Off) |
||||||
- |
||||||
Available Separately and Fits All Manufactures' Existing Shutoffs and Smooth Bore Tips |
||||||
 |
COMBINATION
NOZZLE
|
|
||||
Break appart nozzle of a shutoff 9990, a combipok 1 and a tip Tornadomatic 500. |
||||||
- |
||||||
Automatic gallonage nozzle |
||||||
- |
||||||
from 40 to 150 GPM |
||||||
-
|
||||||
1.0" or 1.5" inlet |
||||||
 |
MULTI-FLOW
NOZZLE
|
|
||||
Automatic gallonage nozzle |
||||||
- |
||||||
from 10 to 125 GPM |
||||||
- |
||||||
1.0" or 1.5" inlet |
||||||
 |
ELECTRIC
FIRE NOZZLE
|
|
||||
This Nozzle Is Dielectric Tested At 20,000 Volts |
||||||
- |
||||||
|
Selectable Gallonage Nozzle With The Flush & Straight Stream Eliminated |
||||||
- |
||||||
Flow Settings 40, 80 & 125 GPM |
||||||
|
- |
||||||
|
All Stainless Steel Construction |
||||||
 |
|
|||||
Combination of a shutoff or playpipe with smooth bore or stacked tips |
||||||
- |
||||||
Available in 1.0",1.5" and 2.5" inlet |
||||||
 |
|
|||||
Machined Out Of High Grade
Aluminum |
||||||
- |
||||||
Size Information Is Engraved
Into Tips |
||||||
- |
||||||
Single , Dual Stacks, Triple
Stacks, or Quad Stacked Tips |
||||||
- |
||||||
Many Different Sizes to
Chose From |
||||||
- |
||||||
 |
|
|||||
Shutoffs with or without pistol grip and with Full Time Swivel Inlet Coupling |
||||||
- |
||||||
|
Full Flow Waterway Models |
||||||
- |
||||||
|
Sizes From 1 to 2.5 Inlets & Outlets |
||||||
|
 |
|
|||||
Tips Only Are Available In Constant Gallonage (Including Low Pressure), Selectable Gallonage & Automatic |
||||||
- |
||||||
|
They Can Be Used With A Shutoff & Replaced With A Smooth Bore Tip When Desired |
||||||
- |
||||||
|
Flows Range From 10 GPM to 400 GPM |
||||||
 |
HOSE
REEL NOZZLE
|
|
||||
Available With Either Female Inlets or Hose Shank |
||||||
- |
||||||
|
Straight Stream to Wide Angle Fog Pattern |
||||||
- |
||||||
|
Nozzle Has Twist Shutoff |
||||||
 |
INTEGRATED
SMOOTH BORE TIP
|
|
||||
Get The Best of Both Worlds |
||||||
- |
||||||
Combine One of Our Integrated
Smooth Bore’s And A Tip of Your Choice To Be Ready For Any Situation |
||||||
- |
||||||
5 Sizes to Chose From |
||||||
3/4”, 7/8”,
15/16”, 1.0”, 1 1/8” |
||||||
- |
||||||
 |
|
|||||
Heatcoat Anodized Die Cast
Aluminum |
||||||
- |
||||||
Other Major Components
Made of Stainless Steel and Galvanized Brass |
||||||
- |
||||||
Light Weight Smaller Design |
||||||
- |
||||||
Economical and Extremely
Durable |
||||||
- |
||||||
 |
|
|||||
High Pressure and Pistol
Nozzles |
||||||
- |
||||||
Branchpipe Nozzles |
||||||
- |
||||||
Copperspray Nozzles |
||||||
- |
||||||
Chimney Nozzles |
||||||
- |
||||||
Galaxie and Flat Spray
Nozzles |
||||||
 |
|
|||||
Single or Dual Inlet Nozzles |
||||||
- |
||||||
POK Dry Chem Application
Rate of 2.0 to 7.0 Lb/Sec. |
||||||
- |
||||||
POK Dry Chem Dual Inlet
85 Ft. Reach With 6% Foam @ 90 PSI |
||||||
- |
||||||
POK Compressed Air Delivers
60 GPM @ 30+ Ft. in a Fine Mist |
||||||
- |
||||||
- |
||||||
 |
|
|||||
5 Styles to Chose From |
||||||
- |
||||||
1” Wildland Version
for Getting at The Buried Burning Materials |
||||||
- |
||||||
Tennessee Style For Lightweight
Overhead Use |
||||||
- |
||||||
3 & 5 Foot Versions
With Handles And Solid Stainless Steel Ends |
||||||
- |
||||||
The GERICO Silo Piercing
Nozzle in 10 Ft. Sections |
||||||
 |
WATER
WALL
|
|
||||
Designed To Deliver A Screen Of Water To Form A Protective Curtain |
||||||
- |
||||||
|
Engineered To Remain In Place Even During Full Flow |
||||||
- |
||||||
|
1.5 Model- Up To 135 GPM With A 85' Wide x 23' Tall Water Wall |
||||||
2.5 Model- Up To 320 GPM With A 105' Wide x 32' Tall Water Wall |
||||||
 |
|
|||||
Effortless Nozzle Handling |
||||||
- |
||||||
Decreased Nozzle Reaction
Force |
||||||
- |
||||||
Reduce arm, Wrist, and
Back Strain |
||||||
- |
||||||
Position In Your Hip, Shoulder,
Or On The Ground |
||||||
- |
||||||
 |
FOG PATTERN
TIPS
|
|
||||
Choice Between Three Tips: Spinning Teeth or Aluminum (NITUFF Hardened) Machined Teeth or Rubber Molded Teeth |
||||||
- |
||||||
|
There Is No Additional Charge On Any Nozzle Purchase-For Our 500 & 650 Series Nozzles |
||||||
- |
||||||
| Optional Stainless Steel Spinning Teeth Are Available |
||||||
 |
COLOR CODED
SYSTEM
|
|
||||
8 Colors Matching NFPA Pump Panel Labeling-Colors Available for Pistol Grips, Combination Fog Nozzle Bumpers & Colored Shutoff Handle Covers |
||||||
- |
||||||
|
You Can Have Multiple Colors On A Single Nozzle |
||||||
- |
||||||
|
No Additional Charge For Color Options On Any Nozzle Purchase |
||||||
 |
OPTIONS
|
|
||||
Low & Medium Expansion Attachment |
||||||
- |
||||||
3 differents handles:Horseshoe, Aluminum & Polyurethane |
||||||
- |
||||||
3 differents Ball Valves: Polyamid, Aluminum & Stainless Steel |
||||||
- |
||||||
2 differents Spinning Teeths: Hostaform C & Stainless Steel |
||||||
- |
||||||
 |
OPTIONAL
NOZZLE INLET
|
|
||||
POK Offers Many Inlet Options |
||||||
- |
||||||
British Instantaneous |
||||||
- |
||||||
Guillemin |
||||||
- |
||||||
Storz |
||||||
- |
||||||
Machino And More |
||||||